Shenzhen Huyidao Precision Technology Co., LTD

Home page

Automatic material return engraving die

Time：

2025-10-29 12:00

Main die-cutting materials: PP film, PC sheet, hard rubber, thick PET.

Die-cutting often encounters the following situations: product deformation, material jamming, knife explosion, inconcentric sleeve cutting, and misalignment. The die is prone to chipping because the film is hard. The die-cut edges are not vertical. "Hu Yidao" can solve these problems.

Punching of thick film: When the thickness of the film exceeds 0.5mm and the double-knife position is less than 3mm, currently most of them adopt the two-knife cutting method, while "Hu Yidao" can be punched with one knife.

[Hu Yidao] Such die-cutting solution capabilities:

1. This mold can be punched and formed in one go to avoid the waste of defective products caused by inaccurate positioning.

2. Since punching hard materials requires extremely high mold return, ordinary EVA foam cannot achieve the effect. Therefore, this mold is equipped with a high-strength self-return device that can design the elastic force according to the characteristics of the material (the elastic device life can reach 5 million/shot). At the same time, different blade angles are designed according to different graphics to solve the deformation problem that may occur during punching.

This type of mold has its own material return device, so there is no need to add additional foam when used in production.

This plan is [Hu Yidao], official website:www.hydjmkj.com Original release, please keep the statement if you need to reprint.

Related Applications

PET precision die cutting die [unique technology]